In modern manufacturing, laser marking technology has become an indispensable tool.
Dot Peen And Scribe Marking are widely used in various industries due to their high efficiency and precision. To achieve efficient marking, it is very important to correctly adjust the current of Dot Peen And Scribe Marking. Next, we will introduce the steps of
Portable Pneumatic Dot Peen Marking Machine current adjustment for you.
1. Understanding Dot Peen And Scribe Marking
Before adjusting the current of Dot Peen And Scribe Marking, we need to understand some basic knowledge. Dot Peen And Scribe Marking are devices that use CO2 lasers as energy sources. They oxidize or evaporate the surface of the working material by laser irradiation, thereby achieving the marking effect. And adjusting the current is to control the output power of the laser.
2. Preparations
Before adjusting the current, we need to do some preparations. First, make sure that the Portable
Pneumatic Dot Peen Marking Machine is in a stopped state and disconnect the power supply. Second, find the current adjustment switch, which is usually located on the control panel of the laser. Finally, prepare a current tester to measure the output current.
3. Adjust the current
Now start adjusting the current. First, reconnect the power supply of the Portable Pneumatic
Dot Peen Marking Machine and turn on the current tester. Then, connect the test lead of the current tester to the current output terminal of the Portable Pneumatic Dot Peen
Marking Machine. Next, turn on the power supply of the Portable Pneumatic Dot Peen Marking Machine and observe the digital display on the current tester. According to the required marking power, gradually adjust the current until the ideal value is reached.
It should be noted that each time the current is adjusted, the current adjustment switch should be adjusted to the minimum first, and then gradually increased. This can avoid sudden excessive current, which may cause damage to the equipment.